All questions

Naval Aircrewman – Mechanical (AWF) Test 1 Practice

Browse all practice questions for the Naval Aircrewman – Mechanical (AWF) Test 1 Practice. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Aim High and Conquer the 2026 Naval Aircrewman (AWF) Mechanical Test! course image
All questions

These questions are part of the practice quiz. Start practicing

  • In engineering terms, what term defines the stress that occurs when two materials slide past each other?
  • What term is used to describe gross weight minus usable fuel?
  • DAPA and legal documents have what level of access limitation?
  • What condition must an aircraft meet to be considered airworthy?
  • What is the purpose of the altimeter in an aircraft?
  • What does the term "Note" emphasize within safety documentation?
  • What term describes the measure of curvature of an airfoil?
  • What does the term base weight refer to?
  • Which components are included in the auxiliary group of an aircraft?
  • Describe the function of a firewall in aircraft design.
  • What is the key characteristic of the C-130 Hercules?
  • Which aircraft is a high wing, twin-engine monoplane designed for carrier landings?
  • What is the VFR minimum ceiling requirement?
  • Which control surface is specifically designed for turning the aircraft left or right?
  • What does the pilot use the control yoke primarily for?
  • What is meant by the term “aerodynamic drag”?
  • What defines the "envelope" of an aircraft in flight?
  • What is the term for the rear edge of an airfoil?
  • What is the flight condition called when the angle of attack increases beyond a certain point that causes lift to decrease?
  • What type of drag primarily affects aircraft as it increases in speed?
  • What form is used for scale reactions, corrections, and measurements?
  • What is the primary function of a stall strip in aerodynamics?
  • What is the term for a helicopter hovering close to the ground, benefiting from additional lift?
  • Which flap type is hinged at the bottom side of the wing?
  • What item is included in Load items expended in flight?
  • What type of aircraft movement involves changing heading to the right or left?
  • What are flaperons primarily used for?
  • What is the force produced by an aircraft's engine known as?
  • What is created when an engine produces thrust?
  • Which law indicates that the change of motion is directly proportional to the force applied?
  • What happens if an aircraft exceeds its operational envelope?
  • When should safe combinations be changed according to military guidelines?
  • What type of aircraft is the C-12 Huron?
  • Define "trim" in the context of an aircraft.
  • What happens to a helicopter's rotor effectiveness when hovering out of ground effect?
  • Which of the following is classified as personal information?
  • What is the primary purpose of a shock strut in an aircraft?
  • What is the role of spoilers on an aircraft wing?
  • At what point is the efficiency of an airfoil maximized related to lift generation?
  • What is the primary function of a thrust reverser?
  • Which aircraft offers long-range, high-speed non-stop flights?
  • Identifiable damage to national security is classified as what?
  • What does an aircraft's stall strip contribute to its performance?
  • What is the definition of 'Arm' in relation to aircraft weight calculations?
  • What indicates a mandatory instruction in military documents?
  • Which of the following is NOT a primary flight control surface?
  • What term describes the individual responsible for the handling of classified materials?
  • What do pilots need to manage to maintain situational awareness?
  • What term describes the torque produced by a weight placed at an arm?
  • What document provides a consolidated record of the training, status, and readiness of flight personnel?
  • What is a stall strip in aviation?
  • What defines the motion of an object in relation to the applied force as per the Second Law of Motion?
  • Which document records changes to weight and balance adjustments used for a specific flight?
  • What term describes the up or down movement of an aircraft?
  • Which aircraft performs the Navy's TACAMO mission?
  • What type of landing gear is most commonly used in naval aircraft?
  • What physiological effect can hypoxia have on pilots?
  • Operational Risk Management (ORM) is primarily utilized for what purpose?
  • What does DD Form 365-4 detail?
  • What level of classification is applied to material that could cause serious damage?
  • What law states that an object in motion stays in motion while an object at rest stays at rest?
  • Which condition is monitored to prevent an engine from overheating?
  • Which of these forces does NOT act on an aircraft during flight?
  • What axis runs from the top to the bottom of an aircraft?
  • What is the primary focus of Background Investigations for military personnel?
  • What is the main advantage of a turbofan engine over a turbojet?
  • What is a key function of the pitot-static system in an aircraft?
  • Which term is often included to emphasize important or critical information?
  • Which force is responsible for opposing the motion of an aircraft?
  • What are the two primary types of fuselage construction?
  • Which component of an aircraft maintains stability about its vertical axis?
  • What does EMCON (Emission Control) aim to achieve?
  • What is shear stress in materials?
  • Which characteristic best defines material that poses a potential risk to national security?
  • How frequently is the NATOPS evaluation conducted?
  • What does Crew Resource Management (CRM) aim to enhance in naval operations?
  • What is the function of trim tabs in an aircraft?
  • Which category of information is designated as For Official Use Only (FOUO)?
  • Which of the following is not a measure of weight concerning aircraft?
  • In the context of flight, what is affected by the application of lift created by the wings and propeller blades?
  • What type of aircraft is the C-37 Gulfstream?
  • What material is often used for aircraft surfaces due to its lightweight properties?
  • What document outlines the procedures and guidelines for flight operations in naval aviation?
  • What is the main purpose of flight control surfaces?
  • Which factor is essential for the functionality of a fuel pump?
  • What type of documents are characterized by limited distribution?
  • What does the term “weight and balance” refer to in aviation?
  • What is the purpose of OPSEC (Operational Security)?
  • Which of the following best describes the purpose of a stall strip?
  • Which part of an aircraft's tail controls the up and down movement?
  • What provides a continuous record of weight and balance for an aircraft?
  • What is the term for the distance from the leading edge to the trailing edge of the wing?
  • What type of flap is flush with the bottom of the airfoil when in the up position?
  • Which classification applies specifically to information that is viewable only by authorized personnel?
  • Which type of aircraft structure incorporates a truss system?
  • What does "magnetic heading" indicate?
  • What is the term for the rear section of an aircraft that includes the rudder and stabilizers?
  • What device helps maintain aircraft stability in flight?
  • What are slats used for in naval aircraft?
  • Which movement involves the wing tips, with one rising and the other falling?
  • What is a Semimonocoque structure characterized by?
  • What key feature is enhanced by the use of composites in aircraft structures?
  • What does a properly calibrated altimeter ensure?
  • What is a "flap" in aviation?
  • Which classification is associated with serious damage to national security?
  • The sum of the weight of an aircraft and its configured items is known as which weight type?
  • What does a Reinforced shell structure utilize?
  • What is the imaginary straight line connecting the leading edge and trailing edge of an airfoil?
  • What term refers to a measure of the heaviness or mass of an object in aviation?
  • What is considered the main body of an aircraft?
  • Which axis is the pivot point for an aircraft's pitch movement?
  • What term signifies a high level of caution regarding potential outcomes leading to injury or death?
  • What term refers to the weight of the aircraft plus fixed operating equipment and unusable fuel?
  • What does the acronym "ATC" stand for in aviation?
  • How do slats contribute to an aircraft's performance at lower speeds?
  • In what position are speed brakes flush with the wing?
  • What term is used in regulation to indicate something that is required?
  • What statement would you find in a flight operations policy regarding future actions?
  • What is a key characteristic of the C-40 Clipper?
  • Which term is used to describe the force that acts to stretch materials?
  • What is the function of the Electronic Security Program?
  • What component of the electrical system provides power to the ignition system?
  • What is the function of the elevator in an aircraft?
  • What is the distance measured in inches from the reference line to the center of gravity of an item called?
  • What is DD Form 365-3 Chart C used to document?
  • What is the function of ailerons on an aircraft?
  • Which stabilizer provides stability about the lateral axis of an aircraft?
  • What do split flaps do when they are lowered?
  • What is one significant advantage of using composite materials in aircraft manufacturing?
  • What is the primary function of an aircraft’s engine?
  • What does the OPNAV 3760/31 document include?
  • In aviation terminology, what is the term for a point from where distances are measured?
  • What group do ailerons belong to?
  • What term refers to procedures designed to help cope with emergencies in aircraft operations?
  • What is one of the main purposes of wing flaps?
  • What is the function of the fuel pump in an aircraft?
  • In what scenario would a safe combination not need to be changed?
  • What is a primary factor in achieving lift during flight?
  • What does compression refer to in the context of stress on materials?
  • What does the acronym "Vne" stand for in aviation?
  • What definitive assessment under Basic Weight does not include the operational crew?
  • Which component helps alter the aircraft's glide angle during landing?
  • What is the definition of tension in the context of aircraft materials?
  • What is the term for the point or support on which a lever turns?
  • In aviation, what effect does improper weight and balance have on an aircraft?
  • What effect does ice accumulation have on an aircraft's performance?
  • Which of the following terms best reflects the idea of situational awareness in aviation?
  • In the context of situational awareness, what does the term "awareness" encompass?
  • How do Fowler flaps operate?
  • What component of a fuel system prevents fuel from flowing back to the tank?
  • How frequently are NATOPS evaluations performed?
  • What aspect does the operational envelope NOT account for?
  • What is a control surface in aviation?
  • Which control surface helps the pilot land in smaller or obstructed areas?
  • What does "hypoxia" refer to in aviation?
  • What does "airworthiness" mean?
  • What is the maximum takeoff weight (MTOW) of an aircraft?
  • What is the primary purpose of a NATOPS evaluation?
  • What level of classification indicates exceptionally grave damage to national security?
  • Which term suggests that an action is recommended, but not mandatory?
  • What phenomenon occurs when the airflow separates from the airfoil, resulting in loss of lift?
  • What role does the shock strut play during aircraft operation?
  • Which of the following terms indicates that an action or procedure is not necessary?
  • According to the principles of motion, an object acted upon by an external force will experience a change in motion according to what?
  • What is the force that acts upward to support an aircraft in flight?
  • What does the acronym MIMS stand for in naval operations?
  • What is the duration of time for a Secret clearance background investigation?
  • Which document provides detailed information for the operation and maintenance of equipment?
  • What is the term used to indicate potential damage to equipment?
  • What is the function of NATOPS in naval aviation?
  • What happens to the fuel consumption when ice forms on the airframe?
  • What document outlines requirements, procedures, and responsibilities for weight and balance of Navy aircraft?
  • Which of the following describes the structure of the C-12 Huron?
  • What is the basic weight plus the crew and all equipment required for the mission known as?
  • What is a notable advantage of tricycle landing gear in aircraft?
  • What classification level would you associate with information that can be made available to a limited audience?
  • What effect do wing flaps have on landing speed?
  • Which document is primarily concerned with weight and balance control of Navy aircraft?
  • What is the term for the angle between the chord line and the relative wind?
  • Which aircraft is known for providing critical logistics support to the Navy?
  • Which navigation system is commonly used in modern aircraft?
  • What is the main function of the main landing gear?
  • What features define the CMV-22B Osprey?
  • What does the term NOFORN specify about the information?
  • Why is the concept of "envelope" important in aviation?
  • What is defined as the maximum safe aircraft weight for landing?
  • What type of surfaces are designed to change the altitude of the aircraft during flight?
  • What is the purpose of control tabs in aviation?
  • Which weight measurement includes the aircraft and all equipment but excludes the crew?
  • Which term describes the fore-to-aft alignment of an airfoil?
  • What governs the frequency of Background Investigations for personnel with a Secret clearance?
  • What is the primary use of an airspeed indicator in aviation?
  • Identify the three main types of aircraft landing gear.
  • What is the minimum passing grade required prior to flight evaluation?
  • What is the main function of the E-6 Mercury in naval operations?
  • What do we call the point around which an object's weight is evenly distributed?
  • What does torsion refer to in terms of stresses?
  • How many hours must one stop consumption of alcohol prior to flight planning?
  • What is an essential aspect of situational awareness?
  • What is the main purpose of an aircraft’s landing gear?
  • What does the acronym "TAS" stand for?
  • What are trim tabs and control tabs classified as?
  • What type of wing incorporates fuel storage within its structure?
  • What kind of stress is associated with a combination of tension and compression?
  • Which document contains rules and regulations related to weight and balance?
  • What role does the pilot’s control yoke fulfill?
  • Explain the term "C.G." in the context of aircraft.
  • Which structure type supports the load by using an external skin or shell?
  • How can a pilot enhance situational awareness during flight?
  • Speed brakes are primarily used for what purpose?
  • Which force acts downward on the aircraft?
  • Which system assists in the optimal navigation of an aircraft?
  • What does the term "stall" describe in aircraft operation?
  • What is the final purpose of the OPSEC program?
  • What is "indicated airspeed" (IAS)?
  • What is the purpose of the pitot tube in an aircraft?
  • What is the primary function of a hydraulic system in an aircraft?
  • What does increased drag without enough lift lead to?
  • Which chapter contains general safety procedures for passengers and aircrew?
  • What describes the direction of the airstream relative to the airfoil?
  • What does "glide ratio" refer to in aviation?
  • Which point along the chord accounts for all changes in lift effectively?
  • In flight operations, understanding the aircraft envelope aids in what key area?
  • What is a consequence of poor situational awareness during flight?
  • Which group of control surfaces includes ailerons, elevators, and rudders?
  • What is the function of the longitudinal axis in an aircraft?
  • Which aircraft is capable of taking off and landing on short runways and is known as the workhorse of the military?
  • Urinalysis results are considered what type of information?
  • What type of documentation typically has very restricted distribution due to security concerns?
  • What term describes the forces acting on an aircraft that are referred to as "loads"?
  • What does “yaw” describe in terms of aircraft movement?
  • What is the primary function of leading edge flaps?
  • What is the minimum score required in a closed book exam to obtain a qualified grade?
  • What is the total weight of an aircraft referred to?
  • What is the primary function of an airspeed indicator?
  • What is the term for ice accumulation on an airframe that negatively affects aircraft performance?
  • What term refers to parts of an aircraft that produce lift?
  • What word indicates a possibility that is not guaranteed but is allowed?
  • Which principle states that as the velocity of a fluid increases, the pressure exerted by the fluid decreases?
  • What does Takeoff Gross Weight refer to?
  • Which law describes that for every action there is an equal and opposite reaction?
  • What is the purpose of an aircraft's thrust line?
  • What does the rudder control in an aircraft?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy